USA The Normally Closed Solid Electric Solenoid Valve (N/C) is constructed with a stainless steel body, 1/2" (G) female threaded connections, and a strong VITON seal. Suitable for outdoor use; do not use underwater. Suitable for use with hot or cold water, natural gas, air, very low viscosity fluids (<20 cst) and gasoline or other petroleum based liquids. Customers chose this general purpose valve for additional gas tanks, sprinkler systems and more. This solenoid valve should not be used continuously for more than 8 hours. This can lead to overheating of the valve. Brand: U.S. Solid Model: USS2-00069 + Size: 1.2 cm. Outlet opening: 16 mm. Body Material: Stainless Steel Gasket/Diaphragm/Gasket: Viton. Rated Voltage: DC 12V ± 10% Current: 1.667A Rated power: 20W Operation Type: Semi-direct Lift Valve Operation mode: normally closed Operating pressure range: 0 to 101 PSI / 0-0.7 MPa (for air, water); 0 to 72 PSI / 0-0.5 MPa (for oil). Flow capacity: 4.8 gallons per minute (GPM) of water at 60oF with a pressure drop of 1 PSI Flow rate: 4.8 HP Minimum operating temperature: -10°C Maximum operating temperature: 120 °C. Suitable media: air, water, oil, natural gas, diesel fuel, kerosene, etc. Quality assurance: CE certified. Overheat warning: not designed for continuous operation (not a 100% duty cycle). When powered on, under normal operating conditions, the solenoid valve becomes hot. The coil will reach a maximum temperature of about 80°C. It fully complies with the national standard: JB/T7352-2010. If it is continuously powered for more than 8 hours, the coil may burn.

• 1 year warranty.
• Versatile, small, responsive, light and durable.

Specifications

Common questions