If you need a little glue in just the right place or even need a lot of glue in a hidden joint on your project, use the DCT Syringe Applicator. It allows you to apply glue under pressure (up to 550 PSI) in areas such as small openings of dovetail sockets. The glue chamber is approximately 3 inches (7.6cm) in length and includes 5 mL, 10 mL, 15 mL, 20 mL markings with single ticks in increments of 1 mL (CCs). It holds 20 mL (0.7 fl oz). Use with water-based (water-soluble) wood glues and silicones for maximum syringe longevity and easy cleaning. Simply fill the glue chamber and push down on the plunger to apply glue to your application. This package includes a syringe with a 1/16-inch tip and 1/32-inch tip for your convenience. Glue not included. REPAIR DELICATE ASSEMBLIES: The DCT Glue Applicator Syringe provides up to 550 PSI of pressurized power to apply glue in small places; Injector syringe holds 20 mL (0.7 fl oz) of water-based wood glues; For veneering, lutherie, craft and hobby gluing, furniture joints, wicker chairs, wooden screen doors, laminates, cabinetry, stair rails and banisters, floor squeaks, or even jewelry making and cake decorating; Additionally use for mechanical work to place fine beads of silicone gasket material EASY TO LOAD: Includes an easy fill-port design that allows you to load glue into the chamber two different ways; Method 1 – Unscrew top where handle is, pull out plunger, pour in glue, screw top back on, flip syringe with tip upwards, remove air, screw on your desired tip, and apply; Method 2 – Remove brass tip, submerge this end in a glue container, pull plunger back until full, reinstall brass tip, and apply EASY TO DISPENSE: Dispensing syringe allows you to apply glue under pressure; If you do not enough space to get glue into a joint on your project, instead of disassembly your project, you can drill a small hole and inject glue through the hole into the joint using this wood glue injector MAINTENANCE: Moisten O-ring before inserting plunger and screwing brass tip into barrel; Do not allow glue to dry in the injector (injector may be immersed in water to prevent glue from hardening); Clean well after use; Removable plunger and brass nozzle allow you to clean thoroughly with warm water and brush (not included) (do not use solvent); Regularly lubricate and use cooking oil on O-ring for a smooth, airtight seal PACKAGE CONTENTS: Package includes (1) adhesive syringe and (2) brass tips with O-rings (1/16-inch and 1/32-inch nozzles); Wood glue not included California Residents Prop 65 warning:Products may contain a chemical known to the State of California to cause cancer, birth defects or other reproductive harm. This product has a manufacturer warranty against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase. See our Seller Return Policy for more details.

• MAINTENANCE: Moisten O-ring before inserting plunger and screwing brass tip into barrel; Do not allow glue to dry in the injector (injector may be immersed in water to prevent glue from hardening); Clean well after use; Removable plunger and brass nozzle allow you to clean thoroughly with warm water and brush (not included) (do not use solvent); Regularly lubricate and use cooking oil on O-ring for a smooth, airtight seal
• PACKAGE CONTENTS: Package includes (1) adhesive syringe and (2) brass tips with O-rings (1/16-inch and 1/32-inch nozzles); Wood glue not included

Specifications

Common questions