By ISO 9001:2015 certified KNL Trading Co., RO/NF Booster pump, black colour, 100 GPD, Input 24-volt, 1.2 amp, compatible with 24 volts SMPS, Flow rate 2 LPM, working pressure 80 PSI to 100 PSI, Suction Capacity 2 mtrs, Maximum Pressure 140 PSI, Maximum inlet pressure 60 PSI, Minimum inlet pressure 1 PSI, 100% Copper armature, very low noise and very low vibration compare to normal RO/NF Booster pump, compatible with 75 gpd, 80 gpd and 100 gpd RO/NF Membrane (Reverse osmosis membrane or Nanofiltration membrane). TDS adjuster/controller allows impurities back into drinking water and therefore should be use right technology of membrane according to tap water TDS. There are 4 variants of KNL-NF Membranes (KNL-NF20 reduces TDS between 20% to 30%, KNL-NF40 reduces TDS between 40% to 50%, KNL-NF60 reduces TDS between 60% to 70% and KNL-NF80 reduces TDS around 80%). Better choice is to use right technology of membrane according to input TDS. The pump having 1 year offsite warranty of one year. In case of malfunctions with the time, the buyer need to send the pump along with invoice to the seller and seller after examining the same will send the same pump/new pump to the buyer through courier.

• Compatible with all domestice water purifier those are operated on 24 voltds DC current used in kitchen and home.
• The pump covers one year of offsite warranty, usual life 5 years. 2 Connectors food grade plastic branded free with this pump. In case of malfunction during the period, the buyer need to send back to the seller through courier and the same will be checked and will be send back to the customer through courier. One side courier charges shall be borne by the buyer.
• The working pressure varies with NF membrane variant and RO membrane. With less water wastage membrane working pressure will be and with more water wastage membrane working pressure will be high. Maximum pressure on assuming membrane is totally blocked without water wastage will be around 140 PSI. The inlet pressure should be at least 1 PSI
• The pump must be operated on 24 volt DC current with smps (adaptor) 2.5 amp or 3 amp. User are requested to check his water purifier smsp configuration first and then need to place the order.

Specifications

Common questions