Description: Bunsen burneris one of the high temperature heating tools commonly used in scientificlaboratories. The Bunsen burner can safely burn gaseous fuel, and the flamedoes not flow back into the gas supply pipe. Gas or natural gas, propane gas,etc. are usually used for fuel. Features: Bunsen burners can be used to heat non-combustibleobjects or solutions. It can be used to heat objects to very high temperatures.The maximum temperature can be close to 1200 °C. Because the operatingtemperature is higher than the alcohol lamp, the material of the lamp must usea heat-resistant metal. Note: Because its fuel is in a gaseous state atroom temperature, special attention should be paid to the safety of thepipeline. Bunsen burners must be used with special care when using them. Alwayscheck that all switches are off before use. The main switch can only be turnedon when it is determined that all switches are off. Steps for usage: 1. Open the laboratory window and keep the airflowing. 2. Attach the Bunsen burner hose to the gas pipeand place it on the fire board. 3. Turn off the air holes of the lamp foot andignite the match on the air outlet. 4. Start the air smash and ignite the light, thenthe flame is orange. 5. Open the air vents to allow fresh air to enter,the flame turns blue and the temperature becomes high. 6. After use, close the air vents and turn off theair sputum. 7. Pull the Bunsen burner out of the trachea. Materail: Zinc alloy base & copper tube Color: silver Total length: 17.5cm/6.89in Base diameter: 7.8cm/3.07in Weight: Approx. 224g

• With gas regulator, air intake regulator, and flame stabilizer.Can be used with natural gas and liquid propane.
• Base diameter - 7.8cm/3.07in, height - 17.5cm/6.89in Materail: Zinc alloy base & copper tube, Weight: Approx. 224g

Specifications

Common questions