The Lumencraft Firefly 800c high powered led bulb is an instant replacement for the bi-pin incandescent bulb in MagCharger. ★★INSTALLATION INSTRUCTIONS★★ Remove the bezel from the head. Take out the reflector and the factory halogen bi-pin bulb. Insert the LED replacement bulb with the pins into the bi-pin slots IF THE PINS ON THE BASE OF THE DROPIN DO NOT LINE UP with the switch tower holes, take the LED bulb back out re insert the factory bulb and twist the bi-pin socket slightly so the notches will line up (do not use the pins on the base of the LED bulb to do so) then reinsert the LED dropin. Next place the lens over the reflector and thread the bezel on till snug. ★★MODE SELECTION★★ If your rechargeable Maglite has multi mode capability from the factory, your 800 lumen LED upgrade bulb will also have this capability. To select the mode, starting in the OFF position, you click the switch one time for high mode. Starting from the OFF position, a fast double click will take you to low mode. Starting from the OFF position, three fast clicks will give you strobe/flash mode.

• INCREASED BATTERY LIFE: Up to 3.5x More run time. Highly efficient Luminus SST-40 LED Consumes only 8 watts of power vs the old factory halogen bulb that consumes 28 watts.

Specifications

Common questions