APPLICATION INSTRUCTION: 1. Surface formulations and surface energies may vary for different materials; each application should be tested for a small range of compatibility prior to large area application. 2. Wear gloves when using this product to avoid any skin injury and if you swallow this product by accident, see a doctor immediately. 3. The sticker surface must be clean and dry. Dirty surface should be cleaned with isopropyl alcohol or acetone solvent. 4. Shake the bottle gently before use. 5. Use gravity feed cloth, serrated roller or brush to apply a thin, even coating thickness on adhesive surfaces that are approximately 0.002 inches (0.05 mm) or less. 6. Simply apply the propeller to the areas that are fully covered with the tape and a drying time of 30 to 90 seconds is recommended. SPECIAL NOTES: Completely use this liquid content as soon as possible after opening or close it securely for next use. Apply a thin, even coating to the adhesive surface using the minimum amount to cover the surface completely. Suitable for low surface energy materials before tape application to increase initial adhesion; operating temperature is between 60oF to 90oF; coverage: about 75m2 (800ft2) per gallon (based on 0.000cm wet coating thickness). Cyclohexane: 45-50%; M-Xylene: 10-15%; O-Xylene: 5-12%; Ethybenzene: 3-5%; Epoxy: 0.1-1%.

• 2cc per package, use immediately after opening the package. Immediately after use, close the lid of the additional bottle and tighten.
• Not only does it work on LLPT double sided acrylic mounting tapes but also on other brands and is compatible with 4298 Bonding Enhancer.

Specifications

Common questions