Just upgraded to a bigger TV and don't want to replace a wall or ceiling mount that still works perfectly fine? The Mount-It! VESA Mount Adapter Kit expands your existing 200x200mm VESA mount to accept TVs with a 300x300mm or 400x400mm hole pattern, so your current mount stays right where it is. Fit comes down to VESA pattern, not screen size. Measure your mount plate and your TV's mounting holes before ordering — this kit is built for a 200x200mm mount plate expanding to a symmetric 300x300mm or 400x400mm TV pattern. It is not designed for 400x200mm or other non-square patterns. Built from heavy-gauge steel with a 66 lb load capacity, the adapter arms are engineered to connect your TV securely once your mount and TV specs are properly matched. Actual weight capacity is limited by whichever is lower — this adapter's rating or your existing mount's rated capacity. The kit includes two separate hardware sets: M6x30 and M8x30 bolts with spacers to attach your TV to the adapter arms, and flat bolts with nylon lock nuts to attach the arms to your existing mount plate. Some mount plates use 8 mounting points; if yours does, pairing the included hardware with spare bolts from your original mount will give you a fully secured fit. Installation is straightforward with a Phillips screwdriver and adjustable wrench, and step-by-step instructions are included. Before mounting, check the back of your TV near the VESA holes for any raised ridges or recessed panels that could keep the adapter from sitting flush. Backed by US-based support and a lifetime warranty, the Mount-It! VESA Mount Adapter Kit is a straightforward way to keep the mount you already have when your TV gets an upgrade.

• EVERYTHING TO ATTACH YOUR TV – Includes M6x30 and M8x30 bolts (4 each) plus 4 spacers sized for most 300x300mm and 400x400mm TVs, so you can connect your new TV directly to the adapter arms.
• EVERYTHING TO ATTACH YOUR EXISTING MOUNT – Includes flat bolts and nylon lock nuts (4 each) to secure the adapter arms to your current 200x200mm mount plate. Some mount plates use 8 mounting points — if yours does, pair the extra holes with hardware from your original mount for a fully secured fit.
• STRAIGHTFORWARD INSTALL, NO GUESSWORK – Attach the adapter arms to your existing mount plate, then connect your TV. Clear step-by-step instructions are included, and a Phillips screwdriver and adjustable wrench are the only tools you'll need. Before mounting, check the back of your TV near the VESA holes for any raised ridges or recessed panels that could prevent a flush fit.
• BACKED BY MOUNT-IT! – Designed and supported by a US-based team, with a lifetime warranty on this adapter kit for lasting peace of mind on your setup.

Specifications

Common questions