MAINTENANCE - Changing the Bulb - (A) Turn off the power and unscrew the head from the handle of device (B) Pull the old bulb downwards, and replace with new one; (C) Screw the head back on to the handle. ATTENTION - 1. Please use the specialized bulb for this device. 2. After the bulb burns out, the temperature will remain high for approximately 5 minutes. 3. Please wait for a moment to avoid injury. CHANGING THE BATTERY: (A) Unscrew the bottom cover from the handle; (B) Remove the old AA batteries, and replace with new ones. Ensure the anode of the batteries points to the head of the device; (C) Screw on the bottom cover of the handle. ATTENTION - Replace all batteries simultaneously and do not use alkali manganese batteries with lithium as bulb life will be reduced; Do not leave worn batteries in the handle; Please take out batteries from the device if not in use for a prolonged period CLEANING & DISINFECTION: Clean the surface of device with 75% alcohol solution at least once a week, avoiding the lenses in the head. And corrosive or polishing detergent is prohibited. ATTENTION - Do not soak, autoclave or let water dip into the device! PERIODIC CHECKS: Preventive inspection & maintenance to be performed including the frequency of such maintenance. The following safety check should be performed at least every 12 months by a qualified person who has adequate training,knowledge, and practical experience to perform these tests - Inspect the equipment & accessories for mechanical & functional damage; Inspect the safety relevant labels for legibility; Verify that the device functions properly as described in the instructions for use ELECTRICAL CLASSIFICATION - (A) Equipment Classification with respect to protection from electric shock: Internally powered equipment. (B) Degree of protection from electric shock: TYPE B. (C) Equipment not suitable for use in the presence of flammable mixture: Yes (D) Mode of operation: intermittent operation

• PERIODIC CHECKS: Preventive inspection & maintenance to be performed including the frequency of such maintenance. The following safety check should be performed at least every 12 months by a qualified person who has adequate training,knowledge, and practical experience to perform these tests - Inspect the equipment & accessories for mechanical & functional damage; Inspect the safety relevant labels for legibility; Verify that the device functions properly as described in the instructions for use
• ELECTRICAL CLASSIFICATION - (A) Equipment Classification with respect to protection from electric shock: Internally powered equipment. (B) Degree of protection from electric shock: TYPE B. (C) Equipment not suitable for use in the presence of flammable mixture: Yes (D) Mode of operation: intermittent operation

Specifications

Common questions