PLA PLUS filament is 3 times stronger than PLA Filament, the color is brighter. No clog, no bubble, no tangle. SUNLU PLA Plus filament has good layer adhesion, very easy to use. Recommend Settings ● Nozzle/Extrusion temperature: 210-235℃; ● Bed/Platform temperature of 55-65℃; ● Printing speed: 50-100mm/s; ● These settings are for 0.4mm nozzle, it may be different with different diameters nozzle. 3 Steps Checking: Why is the Filament Not Sticking to the build bed? ● Temperature Checking - Please check the temperature(bed and nozzle) settings before printing and set it suitable; ● Building Bed Checking - Please check if the bed is level, make sure the nozzle doesn't too far or too close to the bed; ● Speed Checking - Please check if the printing speed of the first layer is too fast. Notes ● Please insert the filament into the side holes after use to avoid tangles; ● Please store the 3D printer filament in a sealed bag or box after using it ● Print With SUNLU Filament Dryer S1/S2/S4

• 【Filament Spool Diameter】- Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on many 3D printers.
• 【Recommend Settings】- We recommend printing at a Nozzle/Extrusion temperature of 210°C - 235°C (410°F - 455°F) and Bed/Platform temperature of 55°C - 65°C (131°F - 149°F).
• 【Strong compatibility】- SUNLU 3D Filament is not only applicable to all SUNLU 3D printing products: FDM 3D Printer, 3D Printer Accessories, Filament Dyer, but also applicable to almost all FDM 3D printers of other brands. For example: Ender 3/Ender 3V2, etc.
• 【SUNLU Main 3D Products】SUNLU offers a wide range of high-quality 3D printing products, including 3D printer filament, filament dryer, FDM 3D printer, 3D pen, 3D pen filament, 3D printer resin, LCD 3D printer, resin curing box, and other accessories, providing you with everything you need for a successful 3D printing experience.

Specifications

Common questions